Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Inglewood?
Spring replacement in Inglewood typically costs $180 to $340 for a standard residential torsion or extension spring, including labor and parts. A single-spring swap on a typical Inglewood single-car door usually lands toward the lower half of that range, while a two-spring torsion system on a heavier double door runs closer to $340. If a snapped spring has also knocked a cable loose or bent a track, plan on a slightly higher bill once we’ve inspected the full system.
We’re Whitestone Garage Door Service, and garage doors are all we do. That focus is why we can give you a straight number instead of a shrug: when you describe your door over the phone or we look at it in person, we know what we’re dealing with. Call (866) 753-8675 for a free estimate.
Key Takeaways
- Most Inglewood spring replacements run $180 to $340, parts and labor included.
- Heavier double-car doors with paired torsion springs sit at the top of that range; lighter single doors sit near the bottom.
- Replacing both springs at once costs less overall than two separate visits, and they wear out on the same schedule.
- Costs ride higher when a spring failure has damaged a cable, drum, or track – which we check on every call.
- Free estimates are available at (866) 753-8675.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work breaks down in Inglewood this year. Prices reflect parts and labor for a typical residential door. Your exact total depends on the door’s weight, the spring system, and whether anything else was affected by the failure.
| Line item | Typical cost (parts + labor) |
|---|---|
| Spring repair (single spring, repair, not full replacement) | $180 – $340 |
| Spring replacement (one torsion or extension spring) | $180 – $340 |
| Spring replacement (paired torsion springs, double door) | Toward the top of the $180 – $340 range |
| Cable repair (if the failure damaged a cable) | $130 – $250 |
| Track realignment (if a falling door bent the track) | $120 – $240 |
| Roller replacement (worn rollers found during service) | $110 – $220 |
| Panel replacement (if the door dropped onto a panel) | $250 – $500 |
| Opener repair (if the opener was strained by the broken spring) | $120 – $320 |
The single biggest driver is spring type and door weight. A torsion spring on a standard double door is a heavier, thicker coil than what you’d find on a light single-car door, and that difference is most of what separates the low end of the range from the high end. The second biggest factor is collateral damage. A spring rarely fails politely. When it snaps, the door can drop fast enough to pull a cable free of its drum or bend a track section, and fixing those parts adds to the total. On the repair side, when the failure is limited to the spring itself, you’ll usually see it land in the same $150 – $600 window as general garage door repair, with spring work at the lower end unless something else is involved.
What Affects Spring Replacement Pricing in Inglewood
No two doors are quite alike, and a handful of things push the number up or down. Here’s what we look at when we price a job.
- Spring type. Torsion springs (the coiled ones mounted on a shaft above the door) cost more than extension springs (the ones that stretch along the sides). Torsion is more common on newer Inglewood homes and lasts longer, so the higher price often evens out over time.
- Door weight and size. A standard double-car door is heavy, and it takes a heavier spring to lift it safely. A single door or a lighter model needs a smaller spring, which keeps the price lower.
- Number of springs. Many double-car doors use two springs working together. Replacing both at once costs more than one, but it’s the right call when they’re the same age – they’ll fail within months of each other, so you’d rather swap them together than pay twice.
- Collateral damage. If the door came down hard, cables, tracks, and rollers can all be affected. We check everything on a spring call so you don’t get a surprise bill later, and so nothing is left dangerously loose.
- Brand and system quirks. We work with eight of the most widely installed brands – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor – so the right spring for your door is something we source and fit correctly the first time. Unfamiliar systems take longer, and that shows up in labor.
- Access and timing. A simple drive-up in most Inglewood neighborhoods is quick to service. A tight space or a door with obstructions takes more time on the clock.
How to Save on Spring Replacement
A few sensible moves keep your bill at the low end of the range without cutting corners.
- Replace both springs together. If your door has two springs and one has failed, the other is almost certainly the same age and will go soon. Replacing both in one visit is cheaper than two separate calls.
- Schedule before rush. Spring failures tend to cluster around heavy-use periods. Booking a replacement during a quiet stretch can mean more scheduling flexibility and a smoother appointment.
- Get everything checked at once. A spring call is a good time to catch a worn roller or a slightly off-track. Fixing small issues alongside spring work beats paying for a separate visit later.
- Ask for a free estimate up front. We’ll give you a clear number before any work starts, so there are no surprises. Call (866) 753-8675 and we’ll price it out.
A quick note on safety: garage door springs are under extreme tension, and a torsion spring can cause serious injury if it releases unexpectedly. We don’t recommend handling a spring replacement yourself, even with a how-to video in front of you. This is one job where a trained specialist is the safer, cheaper choice in the long run. If you’re near the coast and comparing options, our spring replacement in Santa Monica guide covers how the same job prices out one market over.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Inglewood?
Most spring replacements in Inglewood run $180 to $340, including parts and labor. A single spring on a lighter door sits near $180, while paired torsion springs on a heavy double door reach up toward $340. Any cable, track, or roller damage from the failure adds to the total. Call (866) 753-8675 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repairing or replacing the spring itself is almost always cheaper than replacing the whole door, and it’s usually the only thing that needs attention. A spring replacement at $180 to $340 restores a door that’s otherwise sound. Only when the door panels, tracks, or frame are badly damaged does a new door make more sense. Call us and we’ll tell you honestly which route fits your door.
Can you replace a broken spring the same day?
Same-day spring replacement is often possible when you call early, depending on parts availability and schedule. Most Inglewood spring jobs are straightforward once we’ve identified the right spring for your door type and brand. Call (866) 753-8675 to check today’s availability and get a free estimate.
Do I need to replace both springs if only one is broken?
Yes, in most cases it’s the right call. When one of a pair fails, the other is the same age and typically fails within months. Replacing both together in one visit is cheaper than two separate service calls, and it gets the door back to balanced operation at the top of the $180 to $340 range rather than paying twice.
What does spring replacement include?
Spring replacement includes the new spring, the labor to install it safely, and a check of the whole system – cables, tracks, rollers, and the opener – so we know nothing else was strained by the failure. That full check is part of the $180 to $340 range and caught a lot of small problems before they became expensive ones. Call (866) 753-8675 for your free estimate.
Why a Specialist Handles This Right
We work on the widest range of major manufacturers in the market – LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters for spring work because the correct spring for your door comes down to knowing the exact brand and system, matching spring wire gauge and length to the door’s weight, and getting the tension right. A generalist who “also does doors” often guesses, and a guessed spring wears out fast or leaves the door unbalanced. We’d rather measure and get it right the first time.
Some customers call us with no idea what brand or model they have – just that the door won’t lift or the spring let go. That’s fine. Figuring out what’s on your door and quoting the right fix is the whole job. Whether it’s a LiftMaster opener or a Clopay panel, we’ve worked on it. Your door, our specialty.
Spring Failures We See Around Inglewood
Inglewood doors take a beating from the sun and coastal air, and spring fatigue shows up in predictable ways. Afternoon heat loads the metal on south-facing doors, and the salt air that creeps inland wears on the springs and hardware over the years. It’s common to see a door that lifts fine for a while, then suddenly won’t budge one morning. That’s a spring telling you it’s done, and it’s worth a look before the door drops. If the door is completely stuck, we see plenty of jobs where the quickest honest answer is to treat it as general garage door repair until we’ve checked the whole assembly. Either way, a broken spring is a stop-and-call moment – don’t force the door.
For a broader look at how the same Inglewood job fits into the wider picture, our home page lays out our three core services and how we handle the most common brand systems. We offer a single point of contact from diagnosis through parts through completion, so you’re not bounced between companies to get your door working again.
Get a Free Estimate on Your Spring Replacement
If a spring on your garage door has snapped or your door suddenly won’t lift, don’t wait until it drops. Call Whitestone Garage Door Service at (866) 753-8675 for a free estimate on spring replacement in Inglewood. We’ll give you a straight price, explain exactly what needs to happen, and get the right spring fitted safely – right part, right fix, right the first time.
Pricing reflects the Inglewood market as of 2026. Whitestone Garage Door Service offers free estimates – call (866) 753-8675.
What Our Customers Say
"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Brian Fletcher"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Michelle Chen"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
- Daniela Martinez